The Pull Behind Brush Cutter for 2023 - Wild River Review

✔️ POWER BRAND - KOHLER 9.5hp Engine 3.11mph forward speed. Please contact us if you have any special requests on bigger engine and wider cut. Visit www.daredevilmower.com for parts list and prices

✔️ ENVIRONMENTAL FRIENDLINESS - The DareDevil Mower uses less fuel (1.5 liters/hour) and has a larger fuel tank capacity (4 liters) than many other alternatives, resulting in fewer emissions released into the atmosphere. When using the snow plow, no fuel is required because it is powered by electricity.

✔️ OVERALL SIZE - 36.61x33.86x22.83" ✅Fuel tank capacity: 4 liters ✅Machine Net Weight: 280 lb. ✅Standard fuel consumption: 1.2 liters/hour ✅ Cutting width: 55cm ✅ Cutting height: 2cm-18cm

✔️ QUALITY OF CUT - Using a two-piece manganese blade ensures a precise, fine cut that mulches grass and actually helps fertilize your lawn. These mowing decks provide consistent quality whether you're mowing parks and gardens, waterlogged marshes, or densely brushed areas.

✔️ SAFETY - The DareDevil Mower can be operated from up to 200 meters away VIA remote control. Our newly upgraded hydraulic connecting rod keeps it steady as it mows on an incline, increasing safety even further on steep slopes of up to 45 degrees.

11.5 HP (344cc) Briggs & Stratton recoil start engine

Remote operator control console

Single-point height adjustment - 3" - 7" range

Offset hitch allows for towing on either left to right side

Heavy duty stump jumper and two break away swinging blades cut most stems up to 3" in diameter

140cc OHV GAS ENGINE: Powerful 4-cycle gas engine helps you clear the tallest, toughest grass and weeds. Battle tested and battle ready to get the job done effectively and efficiently.

22-INCH CUTTING SWATH: Unique shape makes trimming around fences, garden beds, and other landscaping borders easier cutting bigger jobs down to size. Those hard-to-reach places just became easy-to-reach.

USER FRIENDLY: Off-set trimmer head feature helps to trim hard-to-reach places while the 14-inch ball-bearing wheels help you move easily through rough terrain. Maintain the command and control needed during operation.

COMFORT FOLDING HANDLE: Equipped with a comfort folding handle for convenient storage and transportation.

TRIMMER LINE: STANDARD 0.155” DIAMETER.

Improved gear shift access located on the handlebars for better operator control

10.2 HP (389cc) Honda 12V AND recoil start engine

Single G6 commercial cutting blade

4-Speed transmission with reverse

Adjustable height handlebar with hand controls

10" X 3 TEETH CARBON STEEL BRUSH CUTTER BLADES WITH WASHERS - This 10-inch weed eater blades are one of the best brush cutter blades for weed eaters. These brush blades will cut anything from brush, weeds, saplings, and twigs. Perfect for field clearing and other landscaping jobs.

UNIVERSAL REPLACEMENT BLADE AND WASHER SET - Suitable for use on straight shaft trimmers, cutters, or weed eaters with an arbor size of 1 inch (25.4mm) or 20mm. Versatile, durable, and meets or exceeds OEM specifications, these brush blade kit can increase the parts' lifecycle by at least 50%

COMPATIBLE WITH WELL-KNOWN BRANDS - These brush blades can replace the OEM blades on select Husqvarna, Stihl, Ego, Oregon, and Hitachi trimmer models. They are also suitable for other brands including Coocher Brush Trimmers, Dewalt Brush Trimmers, and as a replacement for Forester brush blades.

PREMIUM-QUALITY BLADES THAT CUT LIKE BUTTER - Experience high-performance cutting with brush blades that are made from fine-grade, heat and rust-resistant carbon steel. Cut and prune without putting much pressure on your brush trimmer as these blades cut sharp and clean.

IMPORTANT NOTE: This replacement kit is an aftermarket product produced by CalPalmy (TM). It meets or exceeds the performance of OEM replacements (based on in-house testing). We do not have any affiliation with or endorsement from any of the manufacturers mentioned.

POWERFUL - Powered by a strong, 163cc 4-Cycle Briggs & Stratton engine. The Earthquake M605 Walk Behind String Mower chops down your unsightly weeds and stubborn brush with ease. The large 14-inch wheels allow you to float through thick grass, weeds, brush, nettles, and other foliage too difficult for push mowers to overcome.

DURABLE - Our one-piece steel deck provides strength and stability while reducing vibration. Super tough nylon line has a cutting swath of 22” to get the job done quickly.

CONVENIENT- Tool-less handlebar adjustment knobs provide compact storage and easy transportation. Never-go-flat wheels ensure that your equipment is ready to go when you are.

OUT-OF-THE-BOX: The setup is super simple with virtually zero assembly required. Simply unfold and tighten the handlebar knobs. Also included in the box are starter strings for the mower head and 4 cycle engine oil.

WARRANTY AND SERVICE: Earthquake is committed to providing a great product and an even better user experience which is why the Earthquake Walk Behind String Mower is backed by a 5-year limited warranty and a 2-year limited engine warranty along with a US-based service team.

10.5 HP (344cc) Briggs & Stratton recoil start engine

Single-point cutting height adjustment of 1.5"-4.5"

Offset hitch allows left to right towing

Two G6 commercial mulching blades

Operating blade engage / disengage controls

10.5 HP Briggs & Stratton recoil start engine

Heavy duty 1/8" thick 44" tow-behind cutting deck with rear discharge

Exclusive bumper roller system

Single-point cutting height adjustment of 1.5"-4.5"

Made in the USA

Four oversized 16x6.5 in. sealant filled pneumatic tires for rugged durability, added stability, and flotation on soft ground

Quick tool-free hitch offset adjustment for 5 possible offset positions

Foldable hitch with 2 in. ball coupler reduces storage space

Simple low maintenance 2-point height adjustment system with locking handles to retain selected height

Heavy duty stump jumper and two break away swinging blades cut most stems up to 3 in. in diameter

The southland wheeled string trimmer features a 20° - 30° trimmer head swivel to trim along a wall or fence in a straight line.

It also has a 5° - 10° trimmer head bevel feature for precise edge trimming along an obstacle

This wheeled string trimmer provides over 35% more torque vs. A typical 25cc hand held string trimmer

Multi-streaming trimmer head accepts 0. 095 in. And 0. 105 in. Trimmer string - you choose the string that is right for your task.

The onboard trimmer string storage keeps your extra string handy at all times. EPA and CARB Compliant

The onboard trimmer string cut length guide ensures you get the perfect 17 in. Cut Swath every time.

The “adjustable Height” Ergonomic loop handle with spring loaded thumb Actuated throttle Control Provides added comfort and less user fatigue.

The heavy duty 12 in. Ball bearing wheels provides maximum maneuverability across all types of terrain.

Space saving edger Attachment (Model# swstmea) quickly converts the unit to a powerful wheeled edger (sold Separately)

Space saving blower Attachment (Model # swstmba) quickly converts the unit to a powerful wheeled blower (sold separately)