The best table saw for beginners April 2024 - Reviews

Portability: Compact size for ease of transportation and storage

Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate

Variety of cuts: 24.5 inches of rip capacity for ripping 4x8 plywood or OSB sheets

Power: 15 Amp, 5800 rpm motor

Onboard storage: Onboard storage provides easy access to the site pro guarding components and push stick when not in use

Guaranteed tough: Metal roll cage ensures job site durability

Your purchase includes one Dewalt table saw, 10inch 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual

Other Specs: Max rip to left of blade – 22inch | Max rip to right of blade – 32-1/2inch | Max width of Dado – 13/16inch | Arbor size – 5/8inch | Amps – 15 | Depth of cut at 45inch – 2-1/4inch | Depth of cut at 90° – 3-1/8inch | No Load Speed: 4800 RPM

Rolling stand designed for easy set up and breakdown with excellent stability

Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate

Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods

MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM

LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability

MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility

BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts

LARGE TABLE: Offers better material support with vice clamping system to secure work piece

THUMB ACTUATED POSITIVE STOPS: For quick miter adjustments

HORIZONTAL HANDLE: For a secure hold

WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty

ELECTRIC BRAKE: Halts the rotation of the blade within seconds preventing unintended cuts

Flexible - power of corded. Freedom of cordless. The world's first battery that automatically changes voltage when you change tools

24" of Rip capacity for ripping 4x8 plywood or osb sheets

Rack and pinion telescoping fence rails make fence adjustments smooth and accurate

Metal roll cage base offer greater durability than plastic Bases

Power-loss reset prevents accidental re-starts following a power disruption when the switch is left in the "on" position

*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

Legendary worm drive gearing with 3-5/8 inch depth of cut and 30-1/2 inch rip capacity

Precision rack and pinion fence system makes fence adjustments quickly and smoothly for accurate cuts

Rugged rolling stand with 16 inch Wheels and easy-load handles delivers unsurpassed mobility

Dust port elbow contains debris to 1 area for clean-up

Outfeed and left support allow for larger cuts to be made by 1 person

Powerful table saw has 15-Amp saw with 4.0 max HP and 3,650 rpm, for rip-cutting and cross cutting of fine and rough materials

Dimensions: 32.5" D x 27" L x 13" H, Product weight: 94 lb

Soft-start circuitry – manages intensity of motor start-up and minimizes the likelihood possibility of tripping a circuit breaker

Constant Response circuitry: Helps maintain speed under load

Restart protection: Helps to avoid accidental startup

Portability: Works seamlessly with the included lighter GTA47W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down

Smart Guard System: Riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut

RACK AND PINION FENCE RAILS - Ensures fence stays parallel to blade for fast smooth, and accurate cuts

INTEGRATED FOLDING STAND - Legs quickly fold in to provide portability and convenient storage

PARALLEL BLADE ALIGNMENT - Available micro-adjustment of blade so that it is parallel to rip fence and miter slot

4x4 CUTTING CAPACITY - Cuts material up to 4x4 at 90 degrees

2-47° BEVEL CAPACITY - Cuts between 2 positive stops at 0 and 45 degrees with quick release lever

DUST PORT ELBOW - Redirects dust to a container for easy cleanup

Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity

Variable speed goes from 400 to 1600 strokes per minute

Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts

Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position

Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades

Blade locking device designed to make blade changes safer and easier

Protects both hands and expensive saw blades from damage

Made from plastic that's tough enough to handle the abuse in any shop

For use with 10-inch table saw blades; helps eliminate the chance of cuts, chipped teeth, and bent blades

Made in the USA; weighs 1 pound shipped

【Powerful Cutting Performance】Equipped with high-power 15 Amp motor in low noise, this table saw delivers 5,000 RPM cutting performance to rip through various kind of hardwood with ease. And the heavy-duty table saw stand effectively prevents table from rollover during cutting.

【36 Tooth Blade & Aluminum Tabletop】Coated alumium tabletop with 26" rip capacity can easily rip through larger wood material and reduce extra friction for smoother sliding. Table saw features36T carbide-tipped blade, which is designed with transparent guard and riving knife to protect you from accidental hurt and flying chips.

【Double Bevel Cutting & Adjustable Height】Featuring the double bevel cutting from 0-45°, this table saw provides cross cut at 90°--3" and bevel cut at 45°--2-1/2". And portable table saw has a large hand wheel to control the blade lifting, convenient for different needs, such as slotting, ripping or cutting.

【Miter Gauge & Rip Fence】Sliding miter gauge can be adjusted from -45° to 45° for cross cutting. And self-aligning rip fence with parallel guide on both sides assists the more precise and stable cutting without any wobbling.

【Ergonomic Benchtop Table Saw】On-board storage system is convenient for your wrench and push stick when not in use. The on/off safety switch is available to control table saw stand and provide overload protection. And the 10 inch table saw can be used without the stand which is convenient for outdoor wood cutting.