Which is the best Enphase EV charger of 2023?

Safety Above Everything: The PulseQ adopts imported chip and intelligent temperature control technology, equipped with various safety protections: voltage protection, over-voltage protection, overload protection, overheating protection, short circuit protection, grounding protection, leakage protection, and lightning protection. This charging unit can operate in environments of -20℃ to 55℃ (-4 to 131°F). The NEMA TYPE 4 water-resistant case and solid 25ft cable suitable for indoor and outdoor.

UL Listed and ENERGY STAR Certified: UL listed and manufactured to meet: NEC 625, SAE J1772, UL 817, UL 991, UL 2231, UL 2251, and UL 2594. Energy Star certified for an average of 10% higher energy efficiency than Level 1 chargers. It also comes with a NEMA 14-50 power plug and J1772 TYPE 1 connector, so it’s compatible with electric vehicles with American standard AC charging interfaces or plug-in hybrid vehicles, including Tesla (Adaptor Needed), Ford, GM, Volkswagen, Nissan, Audi and more.

Share charging with friends and family: The PulseQ app can schedule charging time that allows you to save money on electricity by setting the charging time during off-peak hours. The app also allows you to adjust the charging current range from 6 to 40A, check the mileage added and cost, view charging history, get full charging notifications, track all data of charging statuses and check the price difference between fuel and electricity.

Work Easier With APP: The EV charger will generate a Wi-Fi signal to connect it with your smartphone. Once paired to your smartphone then you can connect PulseQ to your home network. The PulseQ AC home electric car charger can be controlled by more than one person simultaneously. It also has 2 charging modes. When the app loses connection with the charger or WIFI, it will switch to Plug and Play mode and continue to charge your vehicle automatically.

Easy Installation & 24/7 Customer Support: The PulseQ AC electric car charger can easily mount on wall or pole, if the socket is prepared, the charging station can be installed in 15 minutes. Our hotline service can offer technical support to help our customers resolve their problems within 24 hours. TOPDON offers customer support on "Facebook" during weekdays. Search “TOPDON Official” and contact us via message.

SmartSolar MPPT 100-Volt 30 amp: A solar charger gathers energy from your solar panels, and stores it in your batteries, Using the latest, fastest technology, SmartSolar maximises this energy-harvest

The Victron Energy SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged

MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage

Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT solar charge controller with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect

FAST CHARGING | Charge up to 7x faster than a standard wall outlet with Level 2 charging and multiple amperage settings from 6 to 40 amps.

PORTABLE WALL CHARGER | All the power of a wall charger in a mobile, lightweight form factor. Includes carrying case for secure storage in vehicle’s frunk or trunk. Includes wall bracket for easy installation and storage at home.

RUGGED CONSTRUCTION & MATERIALS | Built with military-grade aluminum capable of withstanding wheel loads up to 6,600 lbs. Driveover & impact resistant. Waterproof & dustproof (IP67). Works in all weather with operable temperature range of -22°F to +122°F.

100% COMPATIBLE | Works with all battery electric vehicles & plug-in hybrids with J1772 connector or adapter. Compatible with leading EV's such as Tesla models, Chevrolet Volt and Bolt EV, Hyundai Kona and Ioniq, Kia NIRO, Nissan LEAF, BMW i3, Honda Clarity, Chrysler Pacifica, Jaguar I-PACE, and many more.

READY TO USE, NO INSTALLATION REQUIRED | Plug in with included NEMA 14-50 and 5-15 adapters. Included wall bracket with mounting hardware is easy to install at home (no electrician required).

FAST CHARGING – Designed to make EV charging quick and effortless. Utilizing the standard J1772 charging protocol, this charging cable is compatible with all electric cars and plug-in hybrid. Compact and durable, it is the perfect charging cable for home use and with a 21ft cable that’s long enough for most driveways or garages

LEVEL 2 CHARGER – Our Level 2 charging cable will offer you 3x the charging speed in comparison to your car’s original charger. Boosting 240V and up to 16A, it provides a rapid charging rate of 3.86kw/hour, which equates to approximately 11 miles per hour of charge

HIGH QUALITY – The charging station is rugged and robust, equipped with overvoltage, overheat and overcurrent protection. The indicating light on the charging station helps to show the various stages of charging and to warn of possible errors

TECHNICAL SPECS – Input Power: 240V AC, Voltage Range 185V AC to 264V AC, Frequency: 60Hz, Maximum Current: 16A, Cable Length: 21ft (6.4m), Plug: NEMA 10-30, Weight: 3.3kg (7.3lbs), Operating Temp: -30C (-22F) to 50C (+122F)

LECTRON 1 YEAR WARRANTY – If any of our products fail to meet your expectations, please get in touch with us and we will try to resolve the issue. If we can't resolve the problem to your satisfaction, you will get a full refund or replacement - no questions asked

CERTIFIED SAFE: ClipperCreek level 2 EV chargers are safety certified by ETL, an Independent Nationally Recognized Testing Laboratory, to UL 2594 standards and are ENERGY STAR certified. Designed in California as commercial car charging stations, they are built tough to withstand tire runovers and a wide range of temperatures. They also include fully sealed outdoor ready NEMA 4 enclosures to keep internal components dry and the elements out.

FAST CHARGING: Enjoy up to 9x faster charging than the level 1 electric vehicle charger that your EV came with. With this HCS-50 hardwired 240V 40 Amp level 2 charger you get 9.6kW of power or up to 38 miles per hour of charging, ensuring your EV or plug-in hybrid is ready to go after a night's charge. (The HCS-50 requires a minimum 50 Amp dedicated circuit and the miles per hour charge rate will vary depending on your EV's make and model.)

DESIGNED FOR YOUR MAKE & MODEL: ClipperCreek electric car chargers are compatible with all plug-in EV's sold in the USA, but the HCS-50 is best for vehicles with acceptance rates up to 9.6kW like the Chevy Bolt, Ford Mustang Mach-E, Hyundai Ioniq 5, Kia EV6, and Audi e-tron SUV.

INSTALL WITH CONFIDENCE: Ranked #1 universal EV chargers for customer satisfaction by JD Power, we stand behind our EVSE with a 3-year manufacturer warranty and are here for you if you need us with US-based customer support. The HCS-50 hardwired home EV charger comes fully assembled and offers quick installation to a dedicated 50 Amp circuit with a licensed electrician. Qualifies for state and federal rebates so you can even get money back by doing your electric car charging at home.

INCLUDES EVERYTHING YOU NEED: With a durable and flexible 25 foot long cable with J1772 connector, you can charge your plug-in on the other side of the garage or in the driveway. With a physical manual, you can reference information easily pre or post install. A wall mount EV charger holder ensures you can neatly stow away your charger after use. And a physical J1772 lock puts you in control of who uses your electric car charger at all times.

【3X Faster than 10A Level-1 EV Chargers】 Level 2, 240 Volts, 16 Amp, NEMA 6-20 plug, Fast Charging at home now is simple and convenient with WORKERSBEE 16A portable EV charger. Compact yet powerful, this charger is 3X faster than 10A Level-1 EV Chargers that are packed with your electric vehicles (EVs), with flexible amperage settings of 6/8/10/13/16A.

【Charger for All EVs】 This level 2 EV car charger adopts the SAE-J1772 standard plug for almost all electric cars and plug-in hybrid vehicles.

【Super Safe to Use】 The charging will be safe and protected. This EV charger for all EVs offers multiple automatic built-in protections against Lightning, Current-leakage, Overcurrent, Over-heat, Under-voltage, and Over-voltage for your peace of mind as it stays connected all the time, no matter at outside or indoors.

【User-Friendly Design】 This level 2 EV charger is plug-and-go, working straight out of the box. The LED indicators are easy to see even at night, showing you the charging status, and any abnormal situations by the varied flashing frequency. The 21-foot (6.4m) cable should meet most needs, even in some driveways or garages where the existing 240V circuit is inconveniently located.

【Built to High Standards】 The durable & sturdy construction and high-grade materials provide maximum resistance against even the most challenging conditions. This EV charger for home use can survive under the pressure of up to 1.5 tons of weight. The thick yet flexible cable can be easily stored even in freezing winter.

【2-year warranty】All of WORKERSBEE Level 2 EV Chargers come with 2-year warranty, and around-the-clock support from WORKERSBEE’s best-in-class customer service team will ensure a smooth and effortless onboarding and charging experience.

CERTIFIED SAFE: ClipperCreek level 2 EV chargers are safety certified by ETL, an Independent Nationally Recognized Testing Laboratory, to UL 2594 standards and are ENERGY STAR certified. Designed in California as commercial car charging stations, they are built tough to withstand tire runovers and a wide range of temperatures. They also include fully sealed outdoor ready NEMA 4 enclosures to keep internal components dry and the elements out.

CHARGE 2 EVs ON ONE CIRCUIT: With the HCS-D50 hardwired 240V level 2 dual EV charger you can charge one EV with 40 Amps and 9.6kW of power, providing up to 38 miles per hour of charging, or charge two EVs with 20 Amps and 4.8kW of power, providing 19 miles per hour of charging. (The HCS-D50 requires a minimum 50 Amp dedicated circuit and the miles per hour charge rate will vary depending on your EV's make and model.)

DESIGNED FOR YOUR MAKE & MODEL: ClipperCreek electric car chargers are compatible with all plug-in EV's sold in the USA, but the HCS-D50 is best for vehicles with acceptance rates up to 9.6kW like the Chevy Bolt, Ford Mustang Mach-E, Hyundai Ioniq 5, Kia EV6, and Audi e-tron SUV.

INSTALL WITH CONFIDENCE: Ranked #1 universal EV chargers for customer satisfaction by JD Power, we stand behind our EVSE with a 3-year manufacturer warranty and are here for you if you need us with US-based customer support. The HCS-D50 hardwired duo home EV charger comes fully assembled and offers quick installation to a dedicated 50 Amp circuit with a licensed electrician. Qualifies for state and federal rebates so you can even get money back by doing your electric car charging at home.

INCLUDES EVERYTHING YOU NEED: With two durable and flexible 25 foot long cables with J1772 connectors, you can charge your plug-in's on the other side of the garage or in the driveway. With a physical manual, you can reference information easily pre or post install. Two included wall mount EV charger holders ensure you can neatly stow away your charger after use. And physical J1772 locks puts you in control of who uses your electric car charger at all times.

4X Faster Charging: SHOCKFLO Level 2 EV Charger offers 4X charging speed than a standard charger, getting you 44 miles with only 4 hours under 240V charge. Replaceable NEMA 5-15 adapter allow it to be used for both level 1 & level 2(Both green and red light may on or flash when powered or charged at 240V, it won't affect the normal use)

Work with All EVs: SHOCKFLO EV Electric Vehicle Charger is compatible with all electric vehicles and plug-in hybrids meeting J1772 standard

Charge Anywhere, Anytime: 21ft charging cord is long and flexible enough for most yards or garages. Storage bag is easier to carry, keeping things organized in car and allowing to recharge anytime & anywhere

Certified Safe, Charged Safer: IP65 waterproof and international certified to charge your car at its highest possible speed safely. Protect against lightning, current leakage, grounding, low-voltage, over-voltage, over-charge, over-heat and over-current.We provide warranty of 12 months

Plug, and Charge: SHOCKFLO EV Charger is effortless to use. Plug the charger into the outlet, and it starts charging instantly. LED indicator tells charging progress and errors, letting you know if it's working properly

【8x Faster Charging: About 50-60km / hour】 Level 2, 40A amp Electric vehicle (EV) charging stations equipped with Nema 14-50 outlets are eight times faster than regular level 1 ev charger, with flexible amperage settings up to 40 amps (16/24/32/40 amps adjustable). App can be used to select the right amperage for your home. ——UP TO 48A by professional electrician wiring

【Suitable for All Electric Vehicles】 The J1772 plug ensures compatibility with all electric vehicle makes and models, like for Chevrolet Volt and Bolt EV, for Hyundai Kona and Ioniq, for Kia NIRO, for Nissan LEAF, for Toyota Prius Prime, for BMW i3, for Honda Clarity, for Chrysler Pacifica, for Jaguar I-PACE, etc. Check details page for more information. ( Requires additional adapter for Tesla)

【Built-in Wi-Fi Connectivity - App Remote Control】 With the free App, you can control and monitor charging remotely, get notified when your car is fully charged, and charge during the time period with the lowest electricity bills, and more!

【UL Listed & ENERGY STAR】 cULus Listed by UL, and in compliance with US and Canadian standards, ENERGY STAR certified for efficiency. Eligible for federal tax credit.

【Easy Installation】 Safe and reliable with a 3-year backed by 24/7 customer support from maXpeedingrods. Equipped with a 24ft cable, allows you to use it freely. Our EV charger is temperature and IP65 tested and designed for indoor or outdoor use, protecting against harsh environments

[NEW DESIGN, LONG CABLE]In order to meet more demand of customers，Our research team has developed a new generation of ev charger. And our cable’s whole length from wall plug to car plug is 26ft, the length from box to car plug is 21ft,which could meet the need of most customers.

[PORTABILITY AND EASY OPERATION] When you are traveling or visiting relatives and friends, you don't have to worry about charging, because our chargers can be carried with the car. With the complimentary NEMA5-15-NEMA6-20 adapter, you can use the charger not only in the 220V (NEMA6-20) socket, but also in the 110V (NEMA5-15) socket.

[HIGH COMPATIBILITY] Unlike normal EV chargers, our EV chargers are compatible with most electric cars, which meet SAE J1772 standard.Only used for electric car charging, not include electric motorcycles. All of our products have passed CE certification, and the quality is superior

[HIGH SECURITY] Our EV charger adopts High Strength ABS material, which has better quality and high durability. Our chargers have over-current protection, over-voltage protection, under-voltage protection, leakage protection, overheating protection, waterproof rating of IP65 and other safety protection measures. They can secure your car charging